Home Company Profile Culture Products Feedbook Contact Us
 
  Product List
 
 
   Injection molding machine
   Bottle Blowing Machine
   Water filling equipment
   Juice filling equipment
   Carbonated beverage filling equipment
   3L-10L water filling equipment
   Water Treatment Plants
   Beer filling line
   5Gallon Bottle Filling Line
 
  Contact Us
 
  Address: NO3,Chuangye Road,Jinfen Town,zhangjiagang City,jiangsu Province,China
Contact: Mary Dou
Phone:0086-(0)-13915689110
Tel: 0086-512-58536922
/58536926
Fax: 0086-512-58536922
Website: www.huanyuyj.com
 
  Products Current Location:Home >> Products
Bottle Blowing Machine HY-A4

Product Description:
HY-A4 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe\reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install\test and start up.
14). Low rejection rate: less than 0.2 percent.

Technique parameter:
Model HY-A4
Productivity Depend on bottle design 3200-4000PCS/H
Product type Body diameter 20mm-100mm
Height 50mm-350mm
Neck diameter 15mm-38mm
Mold Cavity 4cavities
Mold thick 240mm
Mold 500*500mm
Main machine power 380v 3Phase /220v 3Phase 50/60HZ<
Rated Power 49kw
Really use power 14kw

Air source LP air compressor 1.6m3/min 1.0MPa 1set (15KW)
HP air compressor 1.2m3/min 3.0MPa 2sets (each set 15KW)
Air dryer 2.0m3/min 3.0MPa 1set
Cooling water Cooling water 15L/min
Size L*W*H 1908*1858*1920mm
Weight 3600kg
Auxiliary equipment
(preform unscrambler)
L*W*H 2000*950*2480mm
Weight 250kg
Resin available PET

Remark:Note that :
1,If customer request our technicians to install machines, so customer need pay 30USD/day,air return ticketsroom and meals.
2,Guarantee period is 15monthes after machines received.
3,The capacity complete depend on the customer demands .We welcome customer to visit our company !At any time ,you will see The machine working and running in our factory !
Home   Company Profile   Culture   Products   Feedbook   Contact Us
Copyright: Zhangjiagang Huanyu Beverage Machinery Co., Ltd. Technical support: WeiLian Network Co., Ltd.